 |
| Quantity: | |
|---|---|
02C05
HaoRui
Black zirconia ceramic Chip Test Bench
Zirconia Test Items is used in various testing applications, including chip temperature testing, high-speed testing, and camshaft performance and durability testing.
Black zirconia ceramics and white zirconia ceramics have minimal differences in material composition. The only distinction lies in the slightly more intricate process of making white zirconia ceramics black. This is typically achieved through the use of black zirconia powder production or blackening treatment. Consequently, black zirconia ceramic products tend to be more costly compared to their white counterparts.
In terms of performance characteristics, black zirconia ceramics and white zirconia ceramics exhibit similar properties. However, from an aesthetic standpoint, black zirconia offers a more textured appearance. Common applications for black zirconia ceramics include watch dials, watch bands, mobile phone backs, medical equipment, instrumentation, probes, ceramic knives, electronic cigarettes, and headphones.
Our Processing accuracy:
(1) shaft: roundness 0.002 mm, concentricity 0.002 mm, finish Ra0.1 ;
(2) Hole: minimum processing hole diameter 0.2 mm, depth up to 6 mm (depending on the material);
(3) groove (seam): minimum processing 0.1mm narrow groove, as well as a variety of shapes of the groove;
(4) plane: the minimum thickness of 0.1MM sheet can be processed, parallelism 0.001mm, measurement tolerance 0.001 mm, finish Ra0.1;
(5) Thread: the minimum can be processed M2 internal thread, precision GB-7h, external thread size is not limited, precision GB-6g.
Zirconia Ceramic Performance Table | |||
| Property | Item | Data | Unit |
| Mechanical Characteristics | Color | BLACK | - |
| Density | 6.02 | g/cm3 | |
| Bending Strength | 800 | MPa | |
| Compressive trength | 3000 | MPa | |
| Elastic Modulus | 200 | GPa | |
| Fracture Toughness | 8 | MPa m1/2 | |
| Weber Coefficient | 15 | m | |
| Vickers Hardness | 1200 | HV 0.5 | |
| Thermal Characterics | Coefficient of Line Thermal Expansion | 10 | 10-6K-1 |
| Thermal Conductivity | 3 | W/mK | |
| Thermal Shock Resistance(Put in Water) | 300 | ΔT °C | |
| Max Working Temperature | 1000 | °C | |
| Electrical Characteristics | Volume Resistance at 20°C | >1013 | Ωcm |
| Dielectric Strength | 11×106 | V/m | |
| Dielectric Constant | 33 | εr | |
| One MHZ Dielectric Loss Angle at 20°C | 0.0016 | tanδ | |
| Chemical Characteristics | Nitric Acid (60%) 90°C | ≒0.00 | WT Loss mg/cm^2/day |
| Sulphuric Acid (95%) 95°C | 0.04 | ||
| Caustic Soda (30%) 80°C | 0.08 | ||
1.Plastic air cushion film
2.Foam material
3.Carton box
4.Wooden case or pallet
Shenzhen Haorui Industrial Technology Co., Ltd was established in June 2006, and it has specialized in the research & development, fabrication and sales of non-standard industrial ceramics, hard alloy (such as tungsten steels), metals and non-metal precision machinery parts for 18 years.
The company has a strong technical level in the processing and manufacturing of industrial ceramics (i.e. zirconia, alumina, silicon nitride, silicon carbide, aluminum nitride, etc.), hard alloys (such as tungsten steels,) non-standard precision parts. The company holds many leading technologies in this field. Moreover, the company has a group of professional technicians with strong technical development abilities and over 10 years working experiences.Most importantly, the company also has a complete production process and quality management system, as well as a complete set of precisely machining equipments and inspection facilities.
A:We are a professional manufacturer of ceramic parts. we are factory.
A: All parts can be customized according to you drawings and will meeting your requirements perfectly.
A: Of course, we will consider discounts for large-volume orders.
A: Yes, we promise to provide quality assurance for all products, inspect according to your drawings and issue an inspection report. If you are not satisfied with our product quality or service, please feel free to give us feedback.
A: Of course, welcome your arrival, please contact us in advance and make an appointment.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us as below:
sales@szhr-tech.com
Black zirconia ceramic Chip Test Bench
Zirconia Test Items is used in various testing applications, including chip temperature testing, high-speed testing, and camshaft performance and durability testing.
Black zirconia ceramics and white zirconia ceramics have minimal differences in material composition. The only distinction lies in the slightly more intricate process of making white zirconia ceramics black. This is typically achieved through the use of black zirconia powder production or blackening treatment. Consequently, black zirconia ceramic products tend to be more costly compared to their white counterparts.
In terms of performance characteristics, black zirconia ceramics and white zirconia ceramics exhibit similar properties. However, from an aesthetic standpoint, black zirconia offers a more textured appearance. Common applications for black zirconia ceramics include watch dials, watch bands, mobile phone backs, medical equipment, instrumentation, probes, ceramic knives, electronic cigarettes, and headphones.
Our Processing accuracy:
(1) shaft: roundness 0.002 mm, concentricity 0.002 mm, finish Ra0.1 ;
(2) Hole: minimum processing hole diameter 0.2 mm, depth up to 6 mm (depending on the material);
(3) groove (seam): minimum processing 0.1mm narrow groove, as well as a variety of shapes of the groove;
(4) plane: the minimum thickness of 0.1MM sheet can be processed, parallelism 0.001mm, measurement tolerance 0.001 mm, finish Ra0.1;
(5) Thread: the minimum can be processed M2 internal thread, precision GB-7h, external thread size is not limited, precision GB-6g.
Zirconia Ceramic Performance Table | |||
| Property | Item | Data | Unit |
| Mechanical Characteristics | Color | BLACK | - |
| Density | 6.02 | g/cm3 | |
| Bending Strength | 800 | MPa | |
| Compressive trength | 3000 | MPa | |
| Elastic Modulus | 200 | GPa | |
| Fracture Toughness | 8 | MPa m1/2 | |
| Weber Coefficient | 15 | m | |
| Vickers Hardness | 1200 | HV 0.5 | |
| Thermal Characterics | Coefficient of Line Thermal Expansion | 10 | 10-6K-1 |
| Thermal Conductivity | 3 | W/mK | |
| Thermal Shock Resistance(Put in Water) | 300 | ΔT °C | |
| Max Working Temperature | 1000 | °C | |
| Electrical Characteristics | Volume Resistance at 20°C | >1013 | Ωcm |
| Dielectric Strength | 11×106 | V/m | |
| Dielectric Constant | 33 | εr | |
| One MHZ Dielectric Loss Angle at 20°C | 0.0016 | tanδ | |
| Chemical Characteristics | Nitric Acid (60%) 90°C | ≒0.00 | WT Loss mg/cm^2/day |
| Sulphuric Acid (95%) 95°C | 0.04 | ||
| Caustic Soda (30%) 80°C | 0.08 | ||
1.Plastic air cushion film
2.Foam material
3.Carton box
4.Wooden case or pallet
Shenzhen Haorui Industrial Technology Co., Ltd was established in June 2006, and it has specialized in the research & development, fabrication and sales of non-standard industrial ceramics, hard alloy (such as tungsten steels), metals and non-metal precision machinery parts for 18 years.
The company has a strong technical level in the processing and manufacturing of industrial ceramics (i.e. zirconia, alumina, silicon nitride, silicon carbide, aluminum nitride, etc.), hard alloys (such as tungsten steels,) non-standard precision parts. The company holds many leading technologies in this field. Moreover, the company has a group of professional technicians with strong technical development abilities and over 10 years working experiences.Most importantly, the company also has a complete production process and quality management system, as well as a complete set of precisely machining equipments and inspection facilities.
A:We are a professional manufacturer of ceramic parts. we are factory.
A: All parts can be customized according to you drawings and will meeting your requirements perfectly.
A: Of course, we will consider discounts for large-volume orders.
A: Yes, we promise to provide quality assurance for all products, inspect according to your drawings and issue an inspection report. If you are not satisfied with our product quality or service, please feel free to give us feedback.
A: Of course, welcome your arrival, please contact us in advance and make an appointment.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us as below:
sales@szhr-tech.com
