 |
| Quantity: | |
|---|---|
02A19
HaoRui
02A19
Zirconia ceramic round parts customization, high-precision ceramic parts, engineering ceramic structural parts
high quality zirconia ceramic parts;
Molding process is mainly hot, dry pressure, isostatic pressing;
Products alumina purity to meet customer requirements, tolerances can be controlled within ± 0.001mm range;
Surface roughness can reach Ra0.2um, for deep processing, the surface roughness can be controlled below Ra0.02um;
According to the use of ceramic pieces of the environment, recommend the best solution for customers.
Zirconia Ceramic （3Y-TZP）Performance Table | |||
| Property | Item | Data | Unit |
| Mechanical Characteristics | Color | Ivory | - |
| Density | 6.02 | g/cm3 | |
| Bending Strength | 800 | MPa | |
| Compressive trength | 3000 | MPa | |
| Elastic Modulus | 200 | GPa | |
| Fracture Toughness | 8 | MPa m1/2 | |
| Weber Coefficient | 15 | m | |
| Vickers Hardness | 1200 | HV 0.5 | |
| Thermal Characterics | Coefficient of Line Thermal Expansion | 10 | 10-6K-1 |
| Thermal Conductivity | 3 | W/mK | |
| Thermal Shock Resistance(Put in Water) | 300 | ΔT °C | |
| Max Working Temperature | 1000 | °C | |
| Electrical Characteristics | Volume Resistance at 20°C | >1013 | Ωcm |
| Dielectric Strength | 11×106 | V/m | |
| Dielectric Constant | 33 | εr | |
| One MHZ Dielectric Loss Angle at 20°C | 0.0016 | tanδ | |
| Chemical Characteristics | Nitric Acid (60%) 90°C | ≒0.00 | WT Loss mg/cm2/day |
| Sulphuric Acid (95%) 95°C | 0.04 | ||
| Caustic Soda (30%) 80°C | 0.08 | ||
The values are typical material properties and may vary according to products configuration and manufacturing process. For more details, Please feel free to contact us.
Zirconia ceramic round parts customization, high-precision ceramic parts, engineering ceramic structural parts
high quality zirconia ceramic parts;
Molding process is mainly hot, dry pressure, isostatic pressing;
Products alumina purity to meet customer requirements, tolerances can be controlled within ± 0.001mm range;
Surface roughness can reach Ra0.2um, for deep processing, the surface roughness can be controlled below Ra0.02um;
According to the use of ceramic pieces of the environment, recommend the best solution for customers.
Zirconia Ceramic （3Y-TZP）Performance Table | |||
| Property | Item | Data | Unit |
| Mechanical Characteristics | Color | Ivory | - |
| Density | 6.02 | g/cm3 | |
| Bending Strength | 800 | MPa | |
| Compressive trength | 3000 | MPa | |
| Elastic Modulus | 200 | GPa | |
| Fracture Toughness | 8 | MPa m1/2 | |
| Weber Coefficient | 15 | m | |
| Vickers Hardness | 1200 | HV 0.5 | |
| Thermal Characterics | Coefficient of Line Thermal Expansion | 10 | 10-6K-1 |
| Thermal Conductivity | 3 | W/mK | |
| Thermal Shock Resistance(Put in Water) | 300 | ΔT °C | |
| Max Working Temperature | 1000 | °C | |
| Electrical Characteristics | Volume Resistance at 20°C | >1013 | Ωcm |
| Dielectric Strength | 11×106 | V/m | |
| Dielectric Constant | 33 | εr | |
| One MHZ Dielectric Loss Angle at 20°C | 0.0016 | tanδ | |
| Chemical Characteristics | Nitric Acid (60%) 90°C | ≒0.00 | WT Loss mg/cm2/day |
| Sulphuric Acid (95%) 95°C | 0.04 | ||
| Caustic Soda (30%) 80°C | 0.08 | ||
The values are typical material properties and may vary according to products configuration and manufacturing process. For more details, Please feel free to contact us.
